YJ-LQ665BT-B 12V/24V Music Player Component for Electric Ride-On Vehicle

Replacement Music Player for Electric Ride On Cars

This YJ-LQ665BT-B music player is one of the ride on car parts Magic Cars offers for electric ride on cars. It works with 12V or 24V systems and is designed to replace the original player in your vehicle.

Key Specifications

• Model: YJ-LQ665BT-B
• Dimensions: 78 x 30 mm
• Input Voltage: 12V/24V
• Output Power: 3W

Fit Requirements

For proper operation, the replacement must match the original player's model, actual size, and all connector interfaces exactly. A mismatch in any of these areas may prevent the player from working correctly.

Connector Guide

• Red 2-pin socket: Power input only
• Black 2-pin socket: Speaker connection
• White 2-pin socket: Always-on light connection
• White multi-pin socket: External device input and output

Important: Never plug the speaker connector into the white always-on light socket. Always connect power to the red 2-pin input to avoid damage.

Installation and Removal

• Snap-in design: The player uses a snap-in buckle, so no tools are required for installation.
• To remove: Slide a flat-head tool into the gap along the top or bottom edge of the player, then gently pry it loose slowly.
• To install: Align the player with the mounting position and press firmly until it snaps securely into place.

Troubleshooting

• Lights on, no startup sound: Check for stuck steering wheel control buttons, a damaged built-in speaker, or an incorrect interface connection.
• No power and no lights: This is caused by an incorrect power connection. Recheck and reconnect the red power input port properly.

Shop all Magic Cars® ride on cars →