(TX10) Red Button 2.4G Bluetooth Remote Control for Kids Electric Ride-On Cars

Description

Compatibility Instructions

To ensure compatibility with your electric ride-on car:

1. Open your broken electric ride-on car and check the control box. If the appearance matches, this part should fit your car.
2. For first-time use (or after battery replacement), follow these steps to match the frequency:
   1. Install two AAA 1.5V batteries, ensuring correct polarity, and close the battery cover. The indicator will flash three times if installed correctly.
   2. Press and hold the frequency key (car select) for about 2 seconds until the indicator flashes.
   3. Turn on the power supply of the car; the indicator should turn off.
   4. If matching is unsuccessful (indicator remains on), turn off the power and repeat steps 2 and 3.

Important Notes

• Before purchasing, confirm that the manual function operates normally. Check for "RX" and "FCC CE" labels on the receiver for frequency synchronization compatibility.
• Turn off the power supply of the electric vehicle before matching frequency. Long press the top white button to sync with your car.
• This product is specifically designed for children's riding toys. Batteries are not included.
• Ensure the purchased part has the same appearance as the original. If there is no "FCC CE" on your control box receiver, it may be compatible with a different remote control.
• If unsure about compatibility, please contact us with a photo of the receiver next to the battery.
• TX1 and TX10 have similar appearances but are not compatible. Verify the receiver model before purchasing.