CST-1A Bluetooth Remote Control Ride-On Car for Kids in White

2.4G Bluetooth Remote Control CST-1A for Kids Powered Ride On (White)

This white 2.4G Bluetooth remote control is one of the ride on car electrical parts we offer for replacing a lost or worn remote on compatible kids' powered ride-on vehicles. Check the fitment details below before ordering.

Compatibility

• Works with electric vehicle internal receiver models CSR-12T-1A, CSR-12T-1B, CSR-12T-2A, CSR-12T-2B, CSR-12T-3A, and CSR-12T-3B.
• The CSR-12T white remote is not compatible with the JR white remote.
• To confirm fit, open the control box in your ride-on car and check that the controller model begins with CSR-12T. The control box appearance should also match this part.

What's Included

• 1 x CST-1A remote control
• Batteries are not included (two AAA 1.5V batteries required)

Setup and Frequency Matching

1. Install two AAA 1.5V batteries, matching the positive and negative markings in the battery chamber, then close the cover. The indicator will flash three times when the battery is installed correctly.
2. Press and hold the frequency key (car select) for about 2 seconds until the indicator flashes.
3. Turn on the power to the car. The indicator will turn off.
4. If the indicator does not turn off, turn off the car's power and repeat steps 2 and 3.

Before You Use

• Refer to the linking instructions on the back of the remote control before use.
• Confirm the car is working properly and that its battery is not damaged.
• This part is designed for specific children's riding toys. Make sure it matches the appearance of the original remote.

Shop all Magic Cars® ride on cars →